(1) During the operation of the unit, pay attention that the indication of the governor oil pressure gauge and the oil pressure gauge of the oil pressure tank shall not differ too much.

(2)机组在停机过程中，应尽量缩短低转速运行时间。当转速下降至额定转速的35％～40％时，可加闸制动。

(2) During the shutdown of the unit, the operation time at low speed shall be shortened as far as possible. When the speed drops to 35% ~ 40% of the rated speed, the brake can be added.

(3)机组在运行中，导水叶的开度限制应放在机组大出力的限制位置。当机组起动与系统并列时，如发现调速系统不稳定，可用开度限制使其稳定。在与系统并列后，可将开度限制放在机组大出力限制的位置。

(3) During the operation of the unit, the opening limit of the guide vane shall be placed at the limit position of the maximum output of the unit. When the unit is started in parallel with the system, if the speed regulation system is found to be unstable, the opening limit can be used to make it stable. After parallel with the system, the opening limit can be placed at the position of the maximum output limit of the unit.

(4)定期检查主轴的摆度。

(4) Regularly check the swing of the spindle.

(5)机组运行中，还应定期做如下工作：

(5) During the operation of the unit, the following work shall also be done regularly:

1)定期切换压油装置的油泵和导轴承油泵，以防电动机受潮。

1) Regularly switch the oil pump and guide bearing oil pump of the oil pressure device to prevent the motor from moisture.

2)调速器各杠杆的连接处要定期注油。

2) The connection of each lever of the Governor shall be filled with oil regularly.

3)各汽水分离器要定期放水。

3) Each steam water separator shall discharge water regularly.

4)定期清扫橡胶水导轴承润滑水的过滤器。

4) Clean the filter of lubricating water of rubber water guide bearing regularly.

5)机组备用时，定期做橡胶水导轴承备用润滑水的投入试验。

5) When the unit is in standby, the standby lubricating water of rubber water guide bearing shall be put into test regularly.

6)定期向蝶阀轴承注油。

6) Fill the butterfly valve bearing regularly.

焦化发电机组专注为您提供新鲜的行业资讯,更多的问题及精彩内容请关注我们的网站：http://www.huannengpower.com，我们会有更多的精彩内容为您

Coking generator set focuses on providing you with fresh industry information. For more questions and wonderful contents, please pay attention to our website: http://www.huannengpower.com , we will have more wonderful content for you