你好,欢迎来到济南济柴环能燃气发电设备有限公司官方网站!

正确使用天然气发电机组

来源:http://www.huannengpower.com   发布于:2016-11-14

  天然气发电机组的油箱在长期使用过程中容易损坏的部位是油箱内部的出油管焊接外的外部焊接点。当风部焊接部位出现虚焊或有砂眼时,就会造成机组在运转中出现转速不稳或发生停机。那么,使用天然气发电机组的时候应该注意什么呢?

  Tank of gas generators in the process of long-term use of easily damaged parts is the flowline welding inside the fuel tank external welding point. When the wind of welding parts in virtual welding or when there are sand holes, will cause the unit in operation speed instability or downtime. So, should pay attention to when using natural gas generator set?

  1、天然气发电机组油箱损坏的原因:造成油箱焊接部位出现虚焊或有砂眼的故障原因是制造厂焊接质量不过关或在运输中出现较在的震动。

  1, gas generator fuel tank damage reason: cause tank welding parts appear empty welding or have sand holes is the cause of the problem in manufacturing welding quality closes nevertheless, or in the transport in vibration.

  2、油箱损坏后的修理方法:油箱内部出油管焊接部位出现虚焊或有砂眼而漏气时,应在油箱外部将出油管拆下,然后拆下油箱内部了出油管。出油管损坏后,一般可用铜焊方法焊接。焊接后,应对出油管的密封性进行检查。

  2, tank damage repair method: after a flowline welding parts in virtual tank welding or have sand holes and air leakage, should be on the outside of the tank out of the tubing will be removed, then remove the fuel tank inside the flowline. Flowline damage, generally available brazing welding method. After welding, sealing inspection flow-line.

  天然气发电机组的清洁保养对于发电机组的寿命和正常运装同样重要。天然气发电机组维修自理,停止关机的形式是必要的,这样做是为了排除虚假启动燃气轮机。

  Cleaning and maintenance of gas generators for the life of the generator set is as important as the normal shipment. Natural gas generator set maintenance on their own, to stop off in the form of a is necessary, this is done to rule out false start gas turbine.


上一篇:发电机组低压配电盘的安装方法
下一篇:沼气发电机组厂家讲解沼气池发电工艺