你好,欢迎来到济南济柴环能燃气发电设备有限公司官方网站!

燃气发电机组的优点有哪些

来源:http://www.huannengpower.com   发布于:2016-12-08

  燃气发电机组具有输出功率局限广,启动和运转牢靠高、发电质量好、分量轻、体积小、维护简略、低频噪声小等长处,普通它们具有以下几个长处:

  Gas generating units with a wide range of output power, start and operation of solid high, good power generation quality, light weight, small size, simple maintenance, low frequency noise and other advantages, they have the following advantages:

  一、燃气发电机组的运转本钱低:新动力、变废为宝以及环保洁净的排放越来越成为用户的首选。

  A gas turbine operation, low cost and environmental protection: new power and waste clean emissions has increasingly become the first choice for users.

  二、燃气发电机组的噪声低振动小。因为燃汽轮机处于高速扭转形态,它的振动十分小,并且低频噪声优于柴油发电机组。

  Two, the low noise vibration of the gas turbine. Because the turbine is in a high speed, its vibration is very small, and the low frequency noise is better than the diesel generator set.

  三、增压器优化匹配。通过增压器的优化匹配,实现低速大扭矩和更快的瞬态响应性能。

  Three, turbocharger optimization matching. Through the optimization of the Turbocharger matching, to achieve low speed and large torque and faster transient response performance.

  四、燃气发电机组采用的可燃性气体是洁净、廉价的动力,诸如:油田伴生气、瓦丝气、结杆气、沼气等,以它们为燃料的发电机组不只运转牢靠,本钱低,并且能变废为宝,不会发生污染。

  Combustible gas, four gas generator is used to clean and cheap power, such as gas, oil field gas, Wa Si rods gas, biogas, using them as turbine fuel not only reliable operation, low cost, and can not waste pollution.

  五、合理的进排气组织。通过凸轮轴相位的优化设计,实现保证较高的充气效率、减少扫气带来的燃料损失及排放、降低排气温度。

  Five, reasonable intake and exhaust organization. Through the optimization design of the cam shaft phase, the realization of the high efficiency of gas charging, reducing the fuel loss and emissions, and reducing the exhaust temperature.

  六、燃气发电机组的启动功能好,启动成功率高。从冷态启动成功后到满负载的工夫仅为30秒钟,而际规则柴油发电机启动成功后3分钟带负载。燃气轮发电机组可以任何情况温度和天气下包管启动的成功率。

  Six, the gas generator set up function is good, the success rate is high. From the start of the cold start to full load time is only 30 seconds, and the rules of the diesel engine start successfully after 3 minutes with the load. Gas turbine generator sets can be any case temperature and weather conditions to ensure the success rate of start-up.

  七、进排气管的优化设计。通过对进排气管进行CFD分析,减少流程阻力,大限度的提高各缸均匀性。气门及座圈优化设计,针对燃气发动机无炭润滑问题,选用耐高温、耐腐蚀、自润滑性能好的材料设计专用气门,气门阀座和气门寿命与柴油机相同。

  Seven, into the exhaust pipe optimization design. Through the CFD analysis of the intake and exhaust pipe, reduce the flow resistance, to maximize the uniformity of each cylinder. Valve and seat ring optimization design for gas engine lubrication without carbon, high temperature and corrosion resistance, good self-lubricating properties of materials to design a special valve, the valve seat and valve life of diesel engine with the same.

  八、高效的燃烧室设计通过活塞燃烧室的优化设计,实现更快和更充分的燃烧、缩短火焰传播距离以降低爆震倾向。

  Eight, efficient combustion chamber design through the optimization of the piston combustion chamber design, to achieve faster and more full combustion, shorten the flame propagation distance in order to reduce the knock tendency.

  您的需求就是我们努力的方向,您的追求就是我们的追求,欢迎您的到来,我们一起进步,一起创新!

  Your demand is our direction, your pursuit is our pursuit, welcome your arrival, we progress together, and innovation!


上一篇:天然气发电机组活塞与气缸
下一篇:瓦斯发电机组对瓦斯气体的要求