你好,欢迎来到济南济柴环能燃气发电设备有限公司官方网站!

沼气发电机组除了发电还能用于机械传动吗?

来源:http://www.huannengpower.com   发布于:2019-11-26

  我们常说有了发电机组发电取之不尽用之不竭的电能,同理它也能普遍地直接应用于各种机械的传动需求。

  We often say that there is an inexhaustible amount of power generated by the generator set. Similarly, it can also be directly applied to the transmission requirements of various machines.

  假定:由1千瓦、120000转的电机,经160倍减速为750转后,经20齿、0?1模的主动齿轮,减速160倍为减速齿轮的3200齿、0?1模,这样减速齿轮的减速力臂可达(0?1模×3200齿÷2)160mm长;有了这160mm长的力臂后,再传动750转、600mm大、10公斤重的惯性轮所产生的惯性力,能传动750转的多大功率的发电机发电?

  Suppose: the motor with 1 kW and 120000 RPM can decelerate 160 times to 750 rpm, and the driving gear with 20 teeth and 0? 1 die can decelerate 160 times to 3200 teeth and 0? 1 die of the decelerating gear, so that the decelerating force arm of the decelerating gear can reach (0? 1 die × 3200 teeth ÷ 2) 160mm long; with this 160mm long force arm, the inertia force generated by the inertia wheel with 750 rpm, 600mm and 10kg weight can be transmitted. 7 What's the power of a 50 rpm generator?

  如经计算,1千瓦、120000转的电机,经160倍减速为750转后,能传动大于1千瓦、750转的发电机发电,便可证明本发电机组的电动—发电—电动往复传动原理是正确的。

  For example, after 160 times reduction of speed to 750 rpm, the motor with 1 kW and 120000 RPM can drive the generator with more than 1 kW and 750 rpm to generate electricity, which can prove that the principle of electric power generation electric reciprocating drive of the generator set is correct.

沼气发电机组

  依据能量守恒定律,电机4输出的力是守恒不灭的;齿轮减速了几倍杠力就要增大几倍;杠杆的力臂增长了几倍,其杠力也会増大几倍;物体的貭量、速度、重量与外力,决议着惯性力的大小等原理,其电机4输出的力经减速齿轮6的160倍减速后,相应地也会增大160倍的力,在此根底上再传动惯性轮7,惯性轮7也会増加160倍的惯性力,有了増加的这160倍的惯性力,自但是然地能传动低转数大功率的发电机发电10,从而完成本发电机组的电动—发电—电动的往复传动了。

  According to the law of conservation of energy, the output force of motor 4 is conserved; when the gear is decelerated several times, the bar force will increase several times; when the lever arm is increased several times, the bar force will increase several times; when the mass, speed, weight and external force of the object determine the magnitude of inertia force, etc., the output force of motor 4 will increase 160 times after the gear 6 is decelerated 160 times Based on this, drive the inertia wheel 7 again, and the inertia wheel 7 will increase 160 times of the inertia force. With the increased 160 times of the inertia force, it can naturally drive the generator with low revolution and high power to generate 10 power, thus completing the electric power generation electric power re transmission of the generator set.

  由于电机与发电机的耗电量与发电量和它们的转速无关,因而依据杠力、惯性力、能量守恒等原理,本发电机组是一定能完成电动—发电—电动的往复传动的。科学()技术是眼见穿的,本文曾经点拨得如此分明了,如还不明白就有点不懂科学了。

  Because the power consumption of the motor and the generator is independent of the power generation and their speed, according to the principles of bar force, inertia force, energy conservation, etc., the generator set can complete the electric power generation electric reciprocating drive. Science (patent) technology is eye-catching. This article has pointed out so clearly. If you don't understand it, you don't understand it.

  由于惯性轮7的惯性力大小,是由惯性轮7的重量、质量、大小、宽窄、速度、外力等要素决议的,牵一发而动全身,因而首先应依据各种规格、型号的轮式发电机組,设计出的惯性轮7是至关重要的。

  Because the inertia force of the inertia wheel 7 is determined by the weight, mass, size, width, speed, external force and other factors of the inertia wheel 7, the first thing to do is to design the best inertia wheel 7 according to various specifications and models of the wheel generator set.

  由于惯性轮7是盘绕轮心转动的,因而除了存在绕轮心转动的惯性力外,还有脫离轮心的向心力惯性。要想取得的绕轮惯性力与向心力惯性,可将惯性轮7尽量放大,以增长惯性轮7的惯性力臂,惯性轮7的惯性力臂増长了,依照杠力原理,自但是然地就能取得惯性轮7的绕轮惯性力与向心力惯性。比方:将同一物体制造为管状比起制造为轮状来,在同样的外力作用下,盘绕轮心的惯性力,前者与后者会小得多。

  Because the inertia wheel 7 rotates around the wheel center, there is not only the inertia force rotating around the wheel center, but also the centripetal force inertia separated from the wheel center. In order to obtain the maximum inertia force and centripetal force, the inertia wheel 7 can be enlarged as much as possible to increase the inertia force arm of the inertia wheel 7. The inertia force arm of the inertia wheel 7 has been increased. According to the principle of bar force, the maximum inertia force and centripetal force inertia of the inertia wheel 7 can be obtained naturally. For example, the inertia force of the center of the wheel is much smaller when the same object is made into a tube than when it is made into a wheel under the same external force.

  由于惯性轮7的绕轮惯性力与向心力惯性是从轮心至外沿都存在的,特别是越到外沿,由于其物体的增加,绕轮惯性力与向心力惯性也会隨之增大,鉴于这一点,惯性轮7內联体齿轮8与从动齿轮9的啮合点,定在什么部位是大有讲究的。如将啮合点无无限放大,固然从动齿轮9的力臂无限增长而同比省力了,但绕轮惯性力与向心力惯性,也会隨着惯性轮7的减速齿轮6力臂点外的力臂増长而减少,因而如何品迭其利害,取得的绕轮惯性力与向心力惯性是大有讲究的。

  Because the inertia force and centripetal force inertia of inertia wheel 7 exist from the wheel center to the outer edge, especially from the outer edge to the outer edge, the inertia force and centripetal force inertia of inertia wheel 7 will increase with the increase of its object. In view of this, it is very important to determine where the best engagement point is between the internal coupling gear 8 of inertia wheel 7 and the driven gear 9. If the meshing point is not enlarged infinitely, although the force arm of driven gear 9 is increased infinitely and the force is saved year on year, the inertia of the force arm and centripetal force will also decrease with the increase of the force arm outside the force arm of reduction gear 6 of inertia wheel 7. Therefore, it is important to know how to stack its interests and obtain the best inertia force and centripetal force inertia of the wheel.

  以上是沼气发电机组为大家介绍的相关内容,想要了解更多内容,欢迎访问网站:http://www.huannengpower.com

  The above is the relevant content of biogas generator set for you. To learn more, please visit the website: http://www.huannengpower.com


上一篇:夏季沼气发电机组运转颐养小技巧,你晓得几个?
下一篇:燃气发电机组长期不用的寄存办法你知道吗?