Gas generator set must ensure constant working temperature when working. However, when the gas generator is running, it will generate heat, and it will also affect the temperature of the gas generator set if the environment is overheated and undercooled.
The overheating of gas generating units can easily damage parts. If the weather is too cold, causing oil and diesel to solidify, it will aggravate low temperature corrosion. The low temperature oil sludge is produced. Oil will oxidize and deteriorate at high temperature.
It is actually to keep the normal temperature of the gas generator working in order to avoid the increase of the strength of the crankshaft and other parts because of the high temperature. Another is to make the oil pump have a larger pump volume to ensure that the friction surface is reliably cooled and lubricated. Because the pump oil volume of the oil pump has a great relationship with the temperature of the oil, the high or low temperature can reduce the pump oil. Only when the oil temperature is normal, the pump oil is the largest. This time the oil viscosity is suitable and the flow is good, so the back flow in the pump can be reduced.
Keeping the normal temperature of the oil of the gas generating set can also reduce the oxidation rate of the oil at high temperature, so as to prolong the service life of the oil.
Before choosing the gas generating set, the user should choose the appropriate fuel gas source according to the local resource condition, then analyze the component of the fuel gas and calculate the low heat value of the gas, and determine the physical state parameters of the gas and the environment state parameters, such as the gas supply component, flow, pressure, temperature, relative humidity, impurity content. Quantity (including liquid content, solid particle content and diameter, sulfur, benzene, phenol, tar and other contents), environmental annual average temperature, maximum temperature, minimum temperature, altitude, and so on.
The unit power is estimated according to the calorific value and gas volume of the gas.
Selection of units, determination of unit parameters, determination of engine and generator brands and models.
If you have a good understanding of the above, and want to know more about the content, please enter our official website: gas generator http://www.huannengpower.com