由于长时间运行，瓦斯发电机机组及配套控制部分性能下降，导致机组功率偏低。为保证机组及配套控制部分的良好运行，拟对瓦斯发电机组进行对配套控制部分进行检修。下面来讲讲具体的内容吧。

Due to long-term operation, the performance of the gas generator unit and its supporting control parts has declined, resulting in the low power of the unit. In order to ensure the good operation of the unit and supporting control part, it is planned to overhaul the supporting control part of the gas generator unit. Now let's talk about the specific content.

(1)清理就地控制柜、远程控制柜灰尘,确保内部及外观效果整洁。

(1) Clean the dust on the local control cabinet and remote control cabinet to ensure that the internal and external effects are clean.

(2)检测就地控制柜、远程控制柜各接线头，确保无松动;若存在松动、脱落现象，重新焊补。

(2) Check the connectors of local control cabinet and remote control cabinet to ensure that they are not loose; If there is looseness and falling off, weld again.

(3)检测就地控制柜、远程控制柜电器件，损坏或显示不准的予以更换。

(3) Detect the electrical components of the local control cabinet and remote control cabinet, and replace them if they are damaged or displayed incorrectly.

(4)检测并恢复就地控制柜的电能传输、电量检测、运行调控、并网(并车)、自动功率因数自动控制、报警保护、报警试验等功能，保障各项性能完好。

(4) Detect and restore the functions of the local control cabinet, such as electric energy transmission, electricity detection, operation regulation, grid connection (parallel operation), automatic power factor control, alarm protection, alarm test, etc., to ensure that all performances are in good condition.

(5)检测并恢复控制系统水温高、油温高、油压低、超速、逆功率、过电流等报警保护功能。

(5) Detect and restore the alarm protection functions of the control system such as high water temperature, high oil temperature, low oil pressure, overspeed, reverse power, overcurrent, etc.

(6)检测并恢复相关系统的手动或自动控制空燃比功能。

(6) Detect and restore the manual or automatic control air/fuel ratio function of the relevant system.

(7)检测并恢复相关对发动机参数(缸温、排温、水温、油温、油压、转速、功率、电压、电流、频率、累计运行时间、累计发电量等)的自动采集和显示功能。

(7) Detect and restore the automatic acquisition and display function of relevant engine parameters (cylinder temperature, exhaust temperature, water temperature, oil temperature, oil pressure, speed, power, voltage, current, frequency, cumulative operation time, cumulative power generation, etc.).

对瓦斯发电机组的控制部分进行清理、故障排查，以恢复其性能。更多相关的事项就来我们网站http://www.huannengpower.com进行咨询吧！

Clean and troubleshoot the control part of the gas generator set to restore its performance. More related matters come to our website http://www.huannengpower.com Consult!