你好,欢迎来到济南济柴环能燃气发电设备有限公司官方网站!

沼气发电机气门空隙的调整方法

来源:http://www.huannengpower.com   发布于:2018-10-16

沼气发电机气门空隙的调整方法

Adjustment method for valve gap of biogas generator

沼气发电机不只解决了沼气工程中的环境问题耗费了很多废弃物维护了环境减少了温室气体的排放,并且变废为宝,产生了很多的热能和电能,在这项技能其中少不了沼气发电机机组的作用,沼气发电机机组在运用的过程中要注意调理气门的空隙,下面就为咱们详细的介绍一下沼气发电机机气门空隙的调理方法:

The biogas generator not only solves the environmental problems in the biogas project, but also consumes a lot of waste to maintain the environment, reduces the greenhouse gas emissions, and turns waste into treasure, and produces a lot of heat and energy. In this skill, the biogas generator is indispensable. The biogas generator is needed in the process of operation. Pay attention to adjust the valve clearance, the following for us to introduce in detail the gas generator valve clearance adjusting methods:

1.沼气发电机机组在气门空隙调整前,先卸下气缸盖罩壳,然后滚动曲轴使飞轮壳检视窗口的指针对准飞轮上的守时“0”度线。操作时,应避免指针变形,并坚持指针坐落飞轮壳上的两条限位线之间。此时,4缸发动机的第14缸;6缸发动机的第16缸均处于上止点。

1. The biogas generator set unloads the cylinder head housing before adjusting the valve clearance, and then rolls the crankshaft to align the pointer of the flywheel housing inspection window with the timekeeping "0" line on the flywheel. During operation, the pointer deformation should be avoided and the pointer should be placed between the two limiting lines on the flywheel housing. At this point, the fourteenth cylinder of the 4 cylinder engine and the sixteenth cylinder of the 6 cylinder engine are at TDC.

沼气发电机组

2.断定在上止点的气缸中哪一缸处在胀大冲程的始点。可微滚动曲轴.调查进排气们是否均处于停止状况来断定。曲轴滚动时,进排气门均不动的那一缸就是处于胀大冲程始点的位置。

2. decide which cylinder in the top end cylinder is at the beginning of the swell stroke. The rolling crankshaft can be slightly rolled to investigate whether the intake and exhaust are all stopped. When the crankshaft rolls, the cylinder that does not move between the intake and exhaust valves is located at the starting point of the expansion stroke.

3.沼气发电机机组在断定胀大冲程始点后,即可按下表进行气门空隙调整。

3. the biogas generator set can adjust the valve gap after pressing the starting point of the expansion stroke.

4.调整气门空隙时,先用扳手和起子,松开摇臂上的锁紧螺母和调理螺钉,按规则空隙值选用厚薄规(又叫升分片)刺进摇臂与气门之间,然后拧动调理螺钉进行调整。当摇臂和气门与薄壁规触摸,但尚能移动厚薄规时停止,并拧紧螺母,最后重复移动厚薄规查看一次。

4. When adjusting the valve clearance, first use the wrench and screwdriver, loosen the lock nut and adjusting screw on the rocker arm, according to the regular clearance value choose thick gauge (also known as lifting slice) pierced between the rocker arm and the valve, and then screw adjusting screw. Stop when the rocker arm and valve touch the gauge, but the gauge can still be moved, tighten the nut, and finally move the gauge again.

济南济柴环能燃气发电设备有限公司,对沼气发电机组感兴趣的朋友可以关注我们http://www.huannengpower.com,更多精彩内容知识敬请期待。

Jinan Jinan Jichai Ring Energy Gas Power Generation Equipment Co., Ltd., interested in biogas generating units friends can pay attention to our http://www.huannengpower.com, more exciting content knowledge please look forward to.

上一篇:焦炉煤气发电机组做为焦化备用电源的特点
下一篇:最后一页