燃气发电机充分利用各种天然气或有害气体作为燃料，变废为宝、运行安全方便，成本效益高，排放污染低，并适宜热、电联产等优点，市场前景十分广阔。当然使用时的一些事项要考虑到才行。

The gas generator makes full use of various natural gas or harmful gas as fuel, which has the advantages of turning waste into treasure, safe and convenient operation, high cost-effectiveness, low emission pollution, and suitable for heat and electricity cogeneration. The market prospect is very broad. Of course, some matters should be taken into consideration when using.

1、燃气发电机组机房应远离明火区域；

1. The gas generator unit room shall be away from the open fire area;

2、燃气发电机组机房应宽敞、明亮且要求安装换气扇以保证良好的通风；

2. The gas generator unit room shall be spacious and bright, and ventilation fans shall be installed to ensure good ventilation;

3、燃气发电机组安装时底盘与地基应用平垫铁找平。接触面积应在60%以上，且分布均匀；

3. During the installation of the gas generator set, the chassis and the foundation shall be leveled with a flat pad iron. The contact area shall be more than 60% and evenly distributed;

4、室内安装照明、开关、线路及其电器应采用防爆措施,且固定牢固；

4. Explosion proof measures shall be taken for indoor lighting, switches, lines and electrical appliances, and they shall be firmly fixed;

5、燃气发电机组机房内应符合消防要求，配备灭火器等消防器械；

5. The gas generator set room shall meet the fire-fighting requirements and be equipped with fire extinguishers and other fire-fighting equipment;

6、燃气发电机组机房内安装可燃气体报警装置，可燃气体泄露时能及时发现；

6. A combustible gas alarm device is installed in the machine room of the gas-fired generator set to detect the leakage of combustible gas in time;

7、60kw以下单台燃气发动机燃气管路的外部主要管道内径应不小于2吋，靠近发动机的部分内径应不小于1吋。60kw以上燃气发电机组则分别是3吋和两吋。且须安装燃气阀门（不锈钢球阀）、型放水阀、防回火装置，燃气管路焊接完成应清理焊渣（用高压空气）；

7. The inner diameter of the external main pipeline of the gas pipeline of a single gas engine under 60kW shall not be less than 2 inches, and the inner diameter of the part near the engine shall not be less than 1 inch. The gas-fired generating units above 60 kW are 3 inches and 2 inches respectively. Gas valve (stainless steel ball valve), type drain valve and anti backfire device shall be installed. After welding of gas pipeline, welding slag shall be cleaned (with high-pressure air);

8、燃气须脱硫、脱水、除尘，其中含流量≤0.25Nm3，氢气≤10%。

8. The gas must be desulfurized, dehydrated and dedusted, including flow ≤ 0.25nm3 and hydrogen ≤ 10%.

使用燃气发电机组工作要考虑相关事项的内容就讲解到这里了，您对此有什么想了解的，可以随时来我们网站http://www.huannengpower.com进行咨询了解！

This is all about the matters to be considered when using the gas generator set. If you want to know anything about it, you can come to our website at any time http://www.huannengpower.com Consult and understand!