燃气发电机组的电机轴使用期间，稳定性能真的是很重要，如果各方面不稳定的话就会对工作造成影响，甚至于对操作人员产生安全隐患，那么燃气发电机组的电机轴稳定会受到什么影响？

　　During the use of the motor shaft of the gas generator set, the stability is really very important. If all aspects are unstable, it will affect the work, and even cause safety hazards to the operator. Then what will affect the stability of the motor shaft of the gas generator set?

　　电机轴不同于拖曳设备的轴，这导致开关磁阻电机上的径向载荷过大，导致金属疲劳。如果电机轴突出端的径向载荷过大，电机轴将在径向弯曲和变形。当电机旋转时，轴会向各个方向扭曲变形，会损坏通常更靠近轴承的电机轴。

　　The motor shaft is different from the shaft of the towed equipment, which results in excessive radial load on the SWITCHED reluctance motor, leading to metal fatigue. If the radial load of the protruding end of the motor shaft is too large, the motor shaft will bend and deform in the radial direction. When the motor rotates, the shaft will distort in all directions, damaging the motor shaft, which is usually closer to the bearing.

　　对于由皮带轮连接的电机，如果皮带轮与开关磁阻电机的输出轴匹配，在运行过程中，由于皮带轮过重或皮带过紧，可能会对电机的输出轴产生很大的压力。连续应力产生的较大弯矩位于输出轴支点附近。

　　For a motor connected by a belt pulley, if the belt pulley matches the output shaft of the switched reluctance motor, during operation, there may be a lot of pressure on the output shaft of the motor due to the belt pulley being too heavy or too tight. The larger bending moment produced by continuous stress is located near the fulcrum of the output shaft.

　　如果反复冲击，会产生疲劳，导致轴逐渐开裂，完全断裂，运行设备和电机会严重损坏和晃动。如果电机固定不牢（如在机架上运行），运行时整个底座会不稳、抖动，电机皮带的张力会不稳，张力会变大或减小，轴可能会损坏。

　　If repeated impact, fatigue will occur, leading to gradual cracking of the shaft, complete fracture, serious damage and shaking of operating equipment and electricity. If the motor is not fixed firmly （such as running on the rack）， the whole base will be unstable and jitter during operation, the tension of the motor belt will be unstable, the tension will be increased or decreased, and the shaft may be damaged.

　　燃气发电机组电机轴加工应力槽不合格。故障是由轴直径和径向交变应力的影响引起的。如果轴径变化很快，很容易断裂，但问题比较小，与电机设计规格有关。如果电机的负荷瞬间过大，外力的冲击也可能造成轴的损坏。

　　Motor shaft machining stress groove unqualified. The fault is caused by the influence of axial diameter and radial alternating stress. If the shaft diameter changes quickly, it is easy to fracture, but the problem is relatively small, and the motor design specifications. If the motor load is too large, the impact of external forces may also cause shaft damage.

　　燃气发电机组的电机轴稳定会受到什么影响？以上就是问题的介绍了，只有您充分对其进行了解才能更好的保证电机组的使用和相关性能的发挥。更多内容就来网站www.huannengpower.com进行咨询吧。

　　What will affect the stability of the motor shaft of the gas generator set? The above is the introduction of the problem, only you fully understand it to better ensure the use of the generator unit and related performance. For more information, please visit www.huannengpower.com.