欢迎进入济南济柴环能燃气发电设备有限公司官网!
当前位置:首页 - 新闻中心 - 发电机知识

发电机知识

瓦斯发电机组的润滑系统你了解吗?

返回 2020.04.28 来源:http://www.huannengpower.com 0
  近年来,瓦斯发电机组销量不断上升,润滑系统作为瓦斯发电机组的血液是非常重要的,不仅要减少发电机组各部件的摩擦,还要减少发电机组的内热,瓦斯发电机组润滑系统是如何工作的呢?
  In recent years, the sales volume of gas generator set is increasing. As the blood of gas generator set, the lubrication system is very important. It is necessary to reduce not only the friction of all components of the generator set, but also the internal heat of the generator set. How does the lubrication system of gas generator set work?
  发电机组采用压力润滑和飞溅润滑的复合润滑方式。
  The generator set adopts the compound lubrication mode of pressure lubrication and splash lubrication.
  1. 压力润滑
  1. Pressure lubrication
瓦斯发电机组
  12V190燃气发电机组一般安装4台油泵。手动和电动预供油泵的进油口通过油管与油底壳内的油相连接。
  12V190 gas generator set is generally installed with 4 oil pumps. The oil inlet of the manual and electric pre feed pump is connected with the oil in the oil pan through the oil pipe.
  启动瓦斯发电机组前,油底壳内的油必须通过预供油泵输送到发电机组摩擦部位,以保证启动过程中必要的润滑。
  Before starting the gas generator set, the oil in the oil pan must be delivered to the friction part of the generator set through the pre feed pump to ensure the necessary lubrication during the starting process.
  预加料时,预加料油泵将油直接从油底壳输送到油冷却器。经滤油器过滤后,大部分油进入主油道,其余部分从滤油器后盖管接头送至增压器和缸盖。
  During pre charging, the pre charging oil pump delivers oil directly from the oil pan to the oil cooler. After being filtered by the oil filter, most of the oil enters the main oil passage, and the rest is sent to the supercharger and cylinder head from the rear cover pipe joint of the oil filter.
  瓦斯发电机组启动后,预供油泵不工作,安装在油底壳上的两个齿轮泵由曲轴通过齿轮传动传动。油泵直接将油底壳内的油通过粗滤网压入油泵支架内腔内的油槽内。
  After the gas generator set is started, the pre feed pump does not work, and the two gear pumps installed on the oil pan are driven by the crankshaft through the gear. The oil pump directly presses the oil in the oil pan into the oil groove in the oil pump bracket through the coarse screen.
  支架:石油分为两路从身体的左侧通过离心过滤器进入油管进入离心过滤器,油过滤后,回流到油底壳,另一路从身体右侧的单向调压室读到油冷却器,冷却后的油进入油过滤器,过滤净化后,大多数清洁油沿着身体的右边斜油道主油道,另一部分从滤油器后盖管接头被带至增压器和气缸盖。
  Bracket: the oil is divided into two ways from the left side of the body through the centrifugal filter to enter the oil pipe into the centrifugal filter. After the oil is filtered, it flows back to the oil pan. The other way reads the oil cooler from the one-way pressure regulating chamber on the right side of the body. The cooled oil enters the oil filter. After the filtration and purification, most of the cleaning oil flows along the main oil channel of the inclined oil channel on the right side of the body, The other part is taken from the oil filter rear cover pipe joint to the supercharger and cylinder head.
  2. 飞溅式润滑
  2. Splash lubrication
  活塞与缸套间的摩擦面、齿轮系统齿间的摩擦面以及燃气发电机组缸盖上的部分气体元件均采用飞溅润滑。
  The friction surface between the piston and the cylinder sleeve, the friction surface between the teeth of the gear system and some gas components on the cylinder head of the gas generator set are all splash lubricated.
  以上是瓦斯发电机组生产厂家为大家介绍的相关内容,想要了解更多内容,欢迎访问网站:http://www.huannengpower.com
  The above is the related content introduced by the manufacturer of gas generator set. For more information, please visit the website: http://www.huannengpower.com
新闻搜索
济南济柴环能燃气发电设备有限公司
  • 服务热线

    0531-62325028
    0531-69951266

瓦斯发电机组的润滑系统你了解吗?

  近年来,瓦斯发电机组销量不断上升,润滑系统作为瓦斯发电机组的血液是非常重要的,不仅要减少发电机组各部件的摩擦,还要减少发电机组的内热,瓦斯发电机组润滑系统是如何工作的呢?
  In recent years, the sales volume of gas generator set is increasing. As the blood of gas generator set, the lubrication system is very important. It is necessary to reduce not only the friction of all components of the generator set, but also the internal heat of the generator set. How does the lubrication system of gas generator set work?
  发电机组采用压力润滑和飞溅润滑的复合润滑方式。
  The generator set adopts the compound lubrication mode of pressure lubrication and splash lubrication.
  1. 压力润滑
  1. Pressure lubrication
瓦斯发电机组
  12V190燃气发电机组一般安装4台油泵。手动和电动预供油泵的进油口通过油管与油底壳内的油相连接。
  12V190 gas generator set is generally installed with 4 oil pumps. The oil inlet of the manual and electric pre feed pump is connected with the oil in the oil pan through the oil pipe.
  启动瓦斯发电机组前,油底壳内的油必须通过预供油泵输送到发电机组摩擦部位,以保证启动过程中必要的润滑。
  Before starting the gas generator set, the oil in the oil pan must be delivered to the friction part of the generator set through the pre feed pump to ensure the necessary lubrication during the starting process.
  预加料时,预加料油泵将油直接从油底壳输送到油冷却器。经滤油器过滤后,大部分油进入主油道,其余部分从滤油器后盖管接头送至增压器和缸盖。
  During pre charging, the pre charging oil pump delivers oil directly from the oil pan to the oil cooler. After being filtered by the oil filter, most of the oil enters the main oil passage, and the rest is sent to the supercharger and cylinder head from the rear cover pipe joint of the oil filter.
  瓦斯发电机组启动后,预供油泵不工作,安装在油底壳上的两个齿轮泵由曲轴通过齿轮传动传动。油泵直接将油底壳内的油通过粗滤网压入油泵支架内腔内的油槽内。
  After the gas generator set is started, the pre feed pump does not work, and the two gear pumps installed on the oil pan are driven by the crankshaft through the gear. The oil pump directly presses the oil in the oil pan into the oil groove in the oil pump bracket through the coarse screen.
  支架:石油分为两路从身体的左侧通过离心过滤器进入油管进入离心过滤器,油过滤后,回流到油底壳,另一路从身体右侧的单向调压室读到油冷却器,冷却后的油进入油过滤器,过滤净化后,大多数清洁油沿着身体的右边斜油道主油道,另一部分从滤油器后盖管接头被带至增压器和气缸盖。
  Bracket: the oil is divided into two ways from the left side of the body through the centrifugal filter to enter the oil pipe into the centrifugal filter. After the oil is filtered, it flows back to the oil pan. The other way reads the oil cooler from the one-way pressure regulating chamber on the right side of the body. The cooled oil enters the oil filter. After the filtration and purification, most of the cleaning oil flows along the main oil channel of the inclined oil channel on the right side of the body, The other part is taken from the oil filter rear cover pipe joint to the supercharger and cylinder head.
  2. 飞溅式润滑
  2. Splash lubrication
  活塞与缸套间的摩擦面、齿轮系统齿间的摩擦面以及燃气发电机组缸盖上的部分气体元件均采用飞溅润滑。
  The friction surface between the piston and the cylinder sleeve, the friction surface between the teeth of the gear system and some gas components on the cylinder head of the gas generator set are all splash lubricated.
  以上是瓦斯发电机组生产厂家为大家介绍的相关内容,想要了解更多内容,欢迎访问网站:http://www.huannengpower.com
  The above is the related content introduced by the manufacturer of gas generator set. For more information, please visit the website: http://www.huannengpower.com